Dhcp Server Configuration Commands; Chapter 1 Dhcp Server Configuration Commands; Dhcp Enable; Dhcp Select Global - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP

Chapter 1 DHCP Server Configuration Commands

1.1 DHCP Server Configuration Commands

1.1.1 dhcp enable

Syntax
dhcp enable
undo dhcp enable
View
System view
Parameter
None
Description
Use the dhcp enable command to enable DHCP.
Use the undo dhcp enable command to disable DHCP.
By default, DHCP is enabled.
You must first enable DHCP before performing other DHCP-related configurations.
This configuration is necessary for both DHCP servers and DHCP relays.
Example
# Enable DHCP.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp enable

1.1.2 dhcp select global

Syntax
VLAN interface view:
dhcp select global
undo dhcp select global
System view:
Chapter 1 DHCP Server Configuration Commands
1-1