Sftp Server Enable; Sftp Server Configuration Commands - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service
Note:
DES (Data Encryption Standard) is the standard algorithm for data encryption.
AES (Advanced Encryption Standard) is the advanced encryption standard
algorithm.
Description
Use the ssh2 command to enable the connection between SSH client and server,
define key exchange algorithm preference, encryption algorithm preference and HMAC
algorithm preference on the server and client.
Example
# Log in to the remote SSHv2.0 server with IP address 10.1.1.2 and adopt the default
encryption algorithm.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ssh2 10.1.1.2
Username: 123
Trying 10.1.1.2 ...
Press CTRL+K to abort
Connected to 10.1.1.2 ...
The Server is not authenticated. Do you continue access it?(Y/N):y
Do you want to save the server's public key?(Y/N):n
Enter password:
**************************************************************************
* Copyright(c) 1998-2006 3Com Corporation.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
**************************************************************************
<3Com>

1.3 SFTP Server Configuration Commands

1.3.1 sftp server enable

Syntax
sftp server enable
Chapter 1 SSH Terminal Service
All rights reserved.*
1-24
Configuration Commands
*
*