Display Ospf Abr-Asbr; Display Ospf Asbr-Summary - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol

3.1.12 display ospf abr-asbr

Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf abr-asbr command to display the information about the ABR
and ASBR of OSPF.
Example
# Display the information about the OSPF ABRs and ASBRs.
<3Com> display ospf abr-asbr
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR
Destination
IA 2.2.2.2
Table 3-1 Description on the fields of the display ospf abr-asbr command
Destination
Area
Cost
Nexthop
Interface

3.1.13 display ospf asbr-summary

Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
OSPF Process 1 with Router ID 1.1.1.1
Area Cost
0.0.0.0 10
Field
3-11
Chapter 3 OSPF Configuration Commands
S = SumASBR
Nexthop Interface
10.153.17.89 Vlan-interface1
Description
Router ID of the ABR or ASBR
Area where the router is connected to the
ASBR
Routing overhead value of the route
Nexthop address to the destination
Local output interface