Network - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
View
DHCP address pool view
Parameter
b-node: Specifies the broadcast type. Nodes of this type acquire host name-to-IP
address mapping by broadcasting.
p-node: Specifies the peer-to-peer type. Nodes of this type acquire host name-to-IP
address mapping by communicating with the NetBIOS server.
m-node: Specifies the mixed type. Nodes of this type are p-nodes with some
broadcasting features.
h-node: Specifies the hybrid type. Nodes of this type are b-nodes with peer-to-peer
communicating features.
Description
Use the netbios-type command to configure the DHCP clients of a global address
pool to be of specified NetBIOS node type.
Use the undo netbios-type command to restore the default NetBIOS node type.
By default, no NetBIOS node type is specified. In this case, the client uses h-node.
Related command: dhcp server ip-pool, dhcp server netbios-type and nbns-list.
Example
# Configure the DHCP clients of the global DHCP address pool 0 to be of b-node type.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-pool-0] netbios-type b-node

1.1.27 network

Syntax
network ip-address [ mask mask ]
undo network
View
DHCP address pool view
Parameter
ip-address: IP address of a network segment., used to specify an IP address range.
mask mask: Specifies a subnet mask in dotted decimal notation.
Chapter 1 DHCP Server Configuration Commands
1-27