Traffic-Bandwidth - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – QoS
Table 1-7 The reset acl counter command vs the reset traffic-statistic command
Command
reset acl counter
reset traffic-statistic
Example
# Clear the statistics about traffic matching ACL 2000.
<3Com> system-view
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] qos
[3Com-qoss-Ethernet1/0/1] reset traffic-statistic inbound ip-group 2000

1.1.21 traffic-bandwidth

Syntax
traffic-bandwidth outbound acl-rule [ system-index ] min-guaranteed-bandwidth
max-guaranteed-bandwidth weight
undo traffic-bandwidth outbound acl-rule
View
QoS view
Clear the ACL statistics.
This command is applicable to ACLs used for filtering and
classifying the traffic processed by software.
ACLs are referenced by software in the following cases:
Referenced by routing policies
Referenced when login users are controlled
In these cases, the ACL number is in the range of 2,000 to
3,999.
Refer to the ACL module in this manual for the introduction
to the reset acl counter command.
Clear the traffic statistics.
This command is applicable to ACLs applied to the
hardware of the switch for filtering and classifying traffic
during data forwarding. Generally, this command is used to
clear the statistics information obtained through the
traffic-statistic command.
1-23
Chapter 1 QoS Commands
Function