3Com 7750 Series Command Reference Manual page 119

3Com Switch 7750 Series
Command Reference Guide — IP / IPX
network network: Displays the network number information of the specified server.
The network number comprises eight hexadecimal numbers and is in the range of 0x1
to 0xFFFFFFFF. The leading 0s can be omitted when you input a network number.
order { network | type }: Displays the service information by network number or by
service type.
type service-type: Displays the service information with a specified service type. It
comprises four hexadecimal numbers, ranging from 0 to FFFF. 0 indicates all the
service types.
verbose: Displays the detailed service information.
Description
Use the display ipx service-table command to view the contents of the IPX service
information table.
Example
# View the contents of the IPX service information table.
[3Com] display ipx service-table
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which the
service is received
Number of Static Entries: 2
Number of Dynamic Entries: 0
Name
S Prn1
S Prn2
# View the details about the IPX service information table.
[3Com] display ipx service-table verbose
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which the
service is received
Number of Static Entries: 2
Number of Dynamic Entries: 0
Name
S Prn1
S Prn2
Type NetId NodeId
0005 000d 000a-000a-000a
0005 0008 000a-000a-000a
Chapter 3 IPX Configuration Commands
Type
0005
0005
Sock Pref Hops
0452 500 02
0452 500 03
3-6
NetId
000d
0008
Recv-If
Vlan-interface1
Vlan-interface1