Snmp-Agent Mib-View - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON
undo snmp-agent local-engineid
View
System view
Parameter
engineid: Specifies the engine ID with a character string, only composed of 10 to 64
hexadecimal numbers. Two hexadecimal characters form an octet.
Description
Use the snmp-agent local-engineid command to set the engine ID of the local SNMP
entity.
Use the undo snmp-agent local-engineid command to restore the default setting.
By default, the device engine ID is "Enterprise number + device information". Device
information is determined according to different products. It can be an IP address, MAC
address or user-defined hexadecimal numeral string.
Related command: snmp-agent usm-user.
Example
# Configure the local device name as 1234512345.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent local-engineid 1234512345

1.1.13 snmp-agent mib-view

Syntax
snmp-agent mib-view { included | excluded } view-name oid-tree
undo snmp-agent mib-view view-name
View
System view
Parameter
included: Includes the MIB subtree.
Excluded: Excludes the MIB subtree.
view-name: View name. It is a character string, ranging from 1 to 32 characters.
oid-tree: The OID MIB subtree of the MIB object subtree. It is a character string, ranging
from 1 to 255 characters. It can be a character string of the variable OID (such as
Chapter 1 SNMP Configuration Commands
1-12