3Com 7750 Series Command Reference Manual page 451

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Description
Use the display bgp routing-table command to display all the BGP routing
information.
Example
# Display all the BGP routing information.
<3Com> display bgp routing-table
Flags:
Dest/Mask
-----------------------------------------------------------------------
#^ 129.1.1.0/24
#^ 129.1.2.0/24
#^ 129.1.3.0/24
#^ 129.1.4.0/24
#^ 129.1.5.0/24
#^ 129.1.6.0/24
#^ 129.1.7.0/24
#^ 129.1.8.0/24
#^ 129.1.9.0/24
#^ 129.1.10.0/24
Routes total: 10
Table 5-6 Description on fields of the display bgp routing-table command
Field
Flags
Dest/Mask
Next Hop
Med
Local-Pref
# - valid ^ - active
D - damped H - history
Next-hop
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
5.5.5.5
Status code:
# – valid (valid route)
^ – active (selected optimal route)
I – internal (IBGP route)
D – damped (attenuation dampened)
H – history (history record)
S – aggregate suppressed (aggregation suppressed)
Destination address/mask
IP address of the next hop
Value of the MULTI_EXIT_DISC attribute, which ranges from 0 to
4294967295
Local preference, which ranges from 0 to 4294967295
Chapter 5 BGP Configuration Commands
I - internal
S - aggregate suppressed
Med Local-pref Origin As-path
Description
5-15
IGP 600
IGP 600
IGP 600
IGP 600
IGP 600
IGP 600
IGP 600
IGP 600
IGP 600
IGP 600