Multicast Load-Sharing Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
If you specify both the port type and the port number, the multicast source port
check information about the specified port is displayed.
Example
# Display the multicast source port suppression state of Ethernet 1/0/1.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] display multicast-source-deny Ethernet 1/0/1
# Display the multicast source port suppression state of all the 100M Ethernet ports.
[3Com] display multicast-source-deny interface Ethernet

2.1.6 multicast load-sharing enable

Syntax
multicast load-sharing enable
undo multicast load-sharing enable
View
System view
Parameter
None
Description
Use the multicast load-sharing enable command to enable multicast load sharing.
Use the undo multicast load-sharing enable command to disable multicast load
sharing.
Multicast load sharing is disabled by default.
Caution:
If layer-3 multicast or multicast VLAN is enabled, multicast load sharing is enabled
by default, that is, this command does not take effect.
Example
# Enable multicast load sharing.
<3Com>system-view
Chapter 2 Common IP Multicast Configuration Commands
2-9