Quit - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – FTP and TFTP
Description
Use the pwd command to display the work directory on an FTP server.
Example
# Enter FTP client view.
<3Com> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Display the work directory on the FTP server.
[ftp] pwd
257 "flash:/temp" is current directory.

1.2.20 quit

Syntax
quit
View
FTP client view
Parameter
None
Description
Use the quit command to terminate an FTP connection and quit to user view.
This command has the same effect as that of the bye command.
Example
# Enter FTP client view.
<3Com> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
Chapter 1 FTP and TFTP Configuration Commands
1-20