Public-Key-Code Begin - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service
Caution:
When SSH protocol is specified, to ensure a successful login, you must configure
the AAA authentication using the authentication-mode scheme command.
The
authentication-mode password or authentication-mode none. When you
configured SSH protocol successfully for the user interface, then you cannot
configure authentication-mode password or authentication-mode none any
more.
Related command: user-interface vty.
Example
# Configure vty0 through vty4 to support SSH only.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] user-interface vty 0 4
[3Com-ui-vty0-4] authentication-mode scheme
[3Com-ui-vty0-4] protocol inbound ssh

1.1.7 public-key-code begin

Syntax
public-key-code begin
View
Public key view
Parameter
None
Description
Use the public-key-code begin command to enter public key edit view and input the
client public key.
You can key in a blank space between characters (since the system can remove the
blank space automatically), or press <Enter> to continue your input at the next line. But
the public key, which is generated randomly by the SSHv2.0-supporting client software,
should be composed of hexadecimal characters.
Related command: rsa peer-public-key, public-key-code end.
protocol inbound
Chapter 1 SSH Terminal Service
ssh configuration
1-7
Configuration Commands
fails if you configured