Display Stp Region-Configuration - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – MSTP
Field
Role
STP State
Protection

1.1.4 display stp region-configuration

Syntax
display stp region-configuration
View
Any view
Parameter
None
Description
Use the display stp region-configuration command to display the activated MST
region configuration, including the region name, region revision level, and spanning
tree instance-to-VLAN mappings configured for the switch.
Related command: stp region-configuration.
Example
# Display the activated MST region configuration.
<3Com> display stp region-configuration
Oper Configuration
Format selector :0
Region name
Revision level
Instance
0
1
2
Table 1-3 Description on the fields of the display stp region-configuration command
Format selector
Region name
Port role
STP state on the port, which can be forwarding and discarding.
Protection type of the port
:hello
:0
Vlans Mapped
21 to 4094
1 to 10
11 to 20
Field
The selector specified by MSTP
The name of the MST region
1-5
Chapter 1 MSTP Configuration Commands
Description
Description