3Com 7750 Series Command Reference Manual page 1073

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging
View
Any view
Parameter
interface-type: Interface type, supported by the switch, which can be Ethernet,
GigabitEthernet, AUX, VLAN-interface and so on.
interface-numbe: Interface number.
module-name: Module name.
Description
Use the display debugging command to display enabled debugging.
If you want to view the current enabled debugging, you can execute the display
debugging command. Executing this command without any parameter will display all
enabled debugging.
Related command: debugging.
Example
# Display all enabled debugging.
<3Com> display debugging
IP packet debugging is on.
The above information indicates that the IP packets debugging is enabled.
1.2.3 display users
Syntax
display users [ all ]
View
Any view
Parameter
all: Displays the information about all user terminal interfaces.
Description
Use the display users command to display the status and configuration information
about user terminal interfaces.
Chapter 1 Basic System Configuration &
1-8
Debugging Commands