Peer Allow-As-Loop; Peer As-Number - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol

5.1.32 peer allow-as-loop

Syntax
peer { group-name | ip-address } allow-as-loop [ number ]
undo peer { group-name | ip-address } allow-as-loop
View
BGP view
Parameter
group-name: Name of a peer group, containing 1 to 47 characters.
ip-address: IP address of the peer.
number: Times of repeating the local AS number, in the range of 1 to 10.
Description
Use the peer allow-as-loop command to allow the local AS number to appear in the
AS_Path attribute of the received route and configure the repeated times.
Use the undo peer allow-as-loop command to cancel the function.
Related command: display current-configuration, display bgp routing-table peer,
and display bgp routing-table group
Example
# Set the times of repeating the local AS that learns routes from 1.1.1.1 to "2".
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer 1.1.1.1 allow-as-loop 2

5.1.33 peer as-number

Syntax
peer group-name as-number as-number
undo peer group-name as-number
View
BGP view
Parameter
group-name: Name of a peer group, containing 1 to 47 characters.
as-number: AS number of the peer or peer group, in the range of 1 to 65535.
Chapter 5 BGP Configuration Commands
5-31