Mirroring-Group Mirroring-Port - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Mirroring

1.1.6 mirroring-group mirroring-port

Syntax
mirroring-group group-id mirroring-port mirroring-port-list { both | inbound |
outbound }
undo mirroring-group group-id mirroring-port mirroring-port-list
View
System view/Ethernet port view
Parameter
group-id: Group number of a mirroring group, in the range of 1 to 20.
mirroring-port mirroring-port-list: Specifies a list of source ports, provided in the form
of mirroring-port-list={
interface-number ] }&<1-8>, where Interface-type interface-number means an Ethernet
port, and &<1-8> means you can specify eight source ports or source port lists.
Note:
For a centralized LPU, if multiple source ports are specified in remote port mirroring
configuration, all the source ports must be on the same LPU.
both: Mirrors packets both received and sent via the port.
inbound: Mirrors only packets received via the port.
outbound: Mirrors only packets sent via the port.
Description
Use the mirroring-group mirroring-port command to configure the source port.
Use the undo mirroring-group mirroring-port command to remove the configuration
of the source port.
Example
# Configure GigabitEthernet1/0/1 as the source port and mirror all packets received via
this port.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] mirroring-group 1 mirroring-port Gigabitethernet1/0/1 inbound
interface-type interface-number
1-8
Chapter 1 Mirroring Commands
[ to interface-type