Ssh Client First-Time Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service
[3Com] ssh client 192.168.0.1 assign rsa-key abc

1.2.7 ssh client first-time enable

Syntax
ssh client first-time enable
undo ssh client first-time
View
System view
Parameter
None
Description
Use the ssh client first-time enable command to configure the client to run the initial
authentication.
Use the undo ssh client first-time command to remove the configuration.
Note:
In the initial authentication, if the SSH client does not have the public key for the server
which it accesses for the first time, the client continues to access the server and save
locally the public key of the server. Then at the next access, the client can authenticate
the server with the public key saved locally.
When the initial authentication function is not available, the client does not access the
server if it does not have the public key of the server locally. In this case, you need first
to save the public key of the target server to the client in other ways.
By default, the client runs the initial authentication.
Example
# Configure the client to run the initial authentication.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ssh client first-time enable
Chapter 1 SSH Terminal Service
1-22
Configuration Commands