3Com 7750 Series Command Reference Manual page 307

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Example
# Display the brief information about the active routes filtered by the basic ACL 2000.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] acl number 2000
[3Com-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[3Com-acl-basic-2000] rule deny source any
[3Com-acl-basic-2000] display ip routing-table acl 2000
Routes matched by access-list 2000:
Summary count: 2
Destination/Mask
10.1.1.0/24
10.1.1.2/32
Refer to Table 1-1 for the description on the displayed information above.
# Display the detailed information about the active and inactive routes filtered by the
basic ACL 2000.
<3Com> display ip routing-table acl 2000 verbose
Routes matched by access-list 2000:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Summary count: 2
**Destination: 10.1.1.0
**Destination: 10.1.1.2
Table 1-2 Description on the fields of the display ip routing-table acl command
Field
Destination
Protocol Pre
DIRECT 0 0
DIRECT 0 0
Protocol: #DIRECT
*NextHop: 10.1.1.2
Vlinkindex: 0
State: <Int ActiveU Retain Unicast>
Age: 7:24 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
Vlinkindex: 0
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 7:24 Cost: 0/0
Destination address
Chapter 1 Static Route Configuration Commands
Cost Nexthop
10.1.1.2 Vlan-interface1
127.0.0.1 InLoopBack0
* = Next hop in use
Mask: 255.255.255.0
Preference: 0
Interface: 10.1.1.2(Vlan-interface1)
Tag: 0
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Tag: 0
Description
1-3
Interface