Ip Route-Static Default-Preference - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol

1.2.3 ip route-static default-preference

Syntax
ip route-static default-preference default-preference-value
undo ip route-static default-preference
View
System view
Parameter
default-preference-value: Default precedence of the static routes, in the range of 1 to
255. It is 60 by default.
Description
Use the ip route-static default-preference command to set the default precedence
of the static routes.
Use the undo ip route-static default-preference command to restore the default
precedence to the default value.
If a static route is configured without the specified precedence, its precedence is set to
the default precedence value.
Related command: display ip routing-table, and ip route-static.
Example
# Set the default precedence of static routes to 120.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] ip route-static default-preference 120
Chapter 1 Static Route Configuration Commands
1-17