3Com 7750 Series Command Reference Manual page 310

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
display ip routing-table ip-address mask
This command only displays the routes exactly matching the specified destination
address and mask.
display ip routing-table ip-address longer-match
This command displays all destination address routes matching the specified
destination address in the natural mask range.
display ip routing-table ip-address mask longer-match
This command displays all destination address routes matching the specified
destination address in the specified mask range.
Example
# There is a corresponding route in the natural mask range. Display the summary.
<3Com> display ip routing-table 169.0.0.0
Destination/Mask
169.0.0.0/16
For detailed description of the output information, see Table 1-1.
# There is no corresponding route (only the longest matching route is displayed) in the
natural mask range. Display the summary.
<3Com> display ip routing-table 169.253.0.0
Destination/Mask
169.0.0.0/8
# There are corresponding routes in the natural mask range. Display detailed
information.
<3Com> display ip routing-table 169.0.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Summary count:2
**Destination: 169.0.0.0
**Destination: 169.0.0.0
Protocol Pre Cost
Static
Protocol Pre
Static
Protocol: #Static
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0
Protocol: #Static
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Chapter 1 Static Route Configuration Commands
Nexthop
60 0 2.1.1.1
Cost Nexthop
60 0 2.1.1.1
* = Next hop in use
Mask: 255.0.0.0
Preference: 60
Interface: 2.1.1.1(LoopBack1)
Tag: 0
Mask: 255.254.0.0
Preference: 60
Interface: 2.1.1.1(LoopBack1)
1-6
Interface
LoopBack1
Interface
LoopBack1