3Com 7750 Series Command Reference Manual page 214

3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding
AddressLearn trap is Enabled
Intrusion trap is Enabled
Dot1x logon trap is Enabled
Dot1x logoff trap is Enabled
Dot1x logfailure trap is Enabled
RALM logon trap is Enabled
RALM logoff trap is Enabled
RALM logfailure trap is Enabled
Vlan id assigned is NULL
Disableport Timeout: 20 s
OUI value:
Index is 5,
GigabitEthernet1/0/1 is link-down
Port mode is Userlogin
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max mac-address num is 100
Stored mac-address num is 0
Authorization is permit
(Any display that follows is omitted.)
Table 1-1 Description on the fields of the display port-security command
Equipment port security is enabled
AddressLearn trap is Enabled
Intrusion trap is Enabled
Dot1x logon trap is Enabled
Dot1x logoff trap is Enabled
Dot1x logfailure trap is Enabled
RALM logon trap is Enabled
RALM logoff trap is Enabled
RALM logfailure trap is Enabled
OUI value is 00efec
Field
1-2
Chapter 1 Port Security Commands
Description
Port security is enabled on the switch.
The sending of address-learning trap
messages is enabled.
The sending of intrusion-detection trap
messages is enabled.
The sending of
authentication success trap messages is
enabled.
The sending of 802.1x user logoff trap
messages is enabled.
The sending of
authentication failure trap messages is
enabled.
The sending of RALM authentication
success trap messages is enabled.
The sending of RALM logoff trap
messages is enabled.
The sending of RALM authentication
failure trap messages is enabled.
802.1x user
802.1x user