Filter-Policy Import - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Note:
The filter-policy export command takes effect only on the routes imported
through the import-route command. If the filter-policy export command is
configured while the import-route command is not configured to import other
non-IS-IS routes, the filter-policy export command does not take effect.
If the protocol argument is not provided in the filter-policy export command, the
command takes effect on all the routes imported to the local device using the
import-route command.
Related command: filter-policy import.
Example
# Use ACL 2000 to filter the routes imported through IS-IS.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] isis
[3Com-isis] filter-policy 2000 export

4.1.13 filter-policy import

Syntax
filter-policy acl-number import
undo filter-policy acl-number import
View
IS-IS view
Parameter
acl-number: ACL number in the range of 2,000 to 3,999.
Description
Use the filter-policy import command to enable IS-IS to filter the received routes.
Use the undo filter-policy import command to disable IS-IS from filtering the
received routes.
IS-IS does not filter the received routes by default.
In some circumstances, only the routing information satisfying certain conditions will
be received. You can configure the filtering condition by setting the filter-policy
parameters.
Related command: filter-policy export.
Chapter 4 Integrated IS-IS Configuration Commands
4-12