Poe Power Max-Value; Poe Power-Management - 3Com 7750 Series Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for 7750 Series:

Table of Contents

3Com Switch 7750 Series

Command Reference Guide – PoE

1.1.11 poe power max-value

poe power max-value max-value

max-value: Maximum PoE power output on the switch, ranging from 37 to 2,400 in W.

Use the poe power max-value command to set the maximum power output on the

By default, the maximum PoE power output on the switch is 2,400 W.

Note that this command works only when the power you specify is greater than the

power that has been distributed to the boards.

# Set the maximum power output of the switch to 2,000 W.

<3Com> system-view

System View: return to User View with Ctrl+Z.

[3Com] poe power max-value 2000

poe power-management { auto | manual } slot slot-number

auto: Manages PoE of the switch automatically.

manual: Manages PoE of the switch manually.

slot-number: Number of the slot where the board resides.

Use the poe power-management command to configure the PoE management mode

of the switch.

Chapter 1 PoE Configuration Commands

Table of Contents