Terminal Logging - 3Com 7750 Series Command Reference Manual

3Com Swich 7750 Series
Command Reference Guide – Information Center
View
User view
Parameter
none
Description
Use the terminal debugging command to configure to display the debugging
information on the terminal.
Use the undo terminal debugging command to configure not to display the
debugging information on the terminal.
By default, the displaying function is disabled.
Related command: debugging commands in the System Maintaining and Debugging
part of the manual.
Example
# Enable the terminal display debugging.
<3Com> terminal debugging
% Current terminal debugging is on

1.1.20 terminal logging

Syntax
terminal logging
undo terminal logging
View
User view
Parameter
none
Description
Use the terminal logging command to enable terminal log information display.
Use the undo terminal logging command to disable terminal log information display.
By default, this function is enabled for console users and terminal users.
Example
# Disable the terminal log display.
<3Com> undo terminal logging
Chapter 1 Information Center Commands
1-23