Display Ospf Brief - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Table 3-2 Description on the fields of the display ospf asbr-summary command.
Field
net
mask
tag
status

3.1.14 display ospf brief

Syntax
display ospf [ process-id ] brief
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf brief command to display brief OSPF information.
Example
# Display brief OSPF information.
<3Com> display ospf brief
RouterID: 10.1.1.1
Spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
SPF computation count: 163
Area Count: 1
Destination network segment
Mask
Tag
Status information, which takes one of the following two values:
DoNotAdv The summary routing information to the network
ertise segment will not be advertised.
The summary routing information to the network
Advertise
segment will be advertised.
OSPF Process 1 with Router ID 10.1.1.1
OSPF Protocol Information
Nssa Area Count: 0
3-13
Chapter 3 OSPF Configuration Commands
Description