Info-Center Source - 3Com 7750 Series Command Reference Manual

3Com Swich 7750 Series
Command Reference Guide – Information Center
By default, the system outputs information to SNMP Agent through channel 5.
Related command: snmp-agent and display info-center.
Example
# Configure the system to output information to the SNMP agent through channel 6.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center snmp channel 6

1.1.14 info-center source

Syntax
info-center source { module-name | default } channel { channel-number |
channel-name } [ debug { level severity | state state }* | log { level severity | state
state }* | trap { level severity | state state }* ]*
undo info-center source { module-name | default } channel { channel-number |
channel-name }
View
System view
Parameter
modu-name: Module name. Refer to Table 1-4 for the detail.
Table 1-4 Modules generating the information
Module name
8021X
ACCOUNT
ACL
ADBM
AM_USERB
ARP
BGP
CFAX
CFM
CLNP
802.1x module
L3+ real time accounting module
Access control list module
Address base module
Access management module
Address resolution protocol module
Border gateway protocol module
Configuration agent module
Configuration file management module
Connectionless network protocol module
1-14
Chapter 1 Information Center Commands
Description