Set Backboard Enhance - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging
Related command: reboot, schedule reboot at, undo schedule reboot, and display
schedule reboot.
Example
# Suppose the current time is 16:26, schedule a reboot so that the switch reboots after
88 minutes.
<3Com> schedule reboot delay 88
Reboot system at 17:54 2005/04/06(in 1 hours and 28 minutes)
confirm?[Y/N]:y
<3Com>
%Apr 6 16:26:38 2005 S7750R CMD/5/REBOOT:
aux0: schedule reboot parameters at 16:26:34 2005/04/06. And system will reboot
at 17:54:2005 04/06/2005.

3.1.24 set backboard enhance

Syntax
set backboard enhance
undo set backboard enhance
View
System view
Parameter
None
Description
Use the set backboard enhance command to specify the clock of inter-card HG
tunnels to work in the enhanced mode (at the frequency of 187 MHz).
Use the undo set backboard enhance command to specify the clock of inter-card HG
tunnels to work in the standard mode (at the frequency of 127 MHz).
By default, the clock of inter-card HG tunnels works in the standard mode.
Caution:
This function can be enabled normally and takes effect only on Switch 7750 switches
equipped with 3C16860 cards.
3-18
Chapter 3 Device Management
Commands