Igmp-Snooping Max-Response-Time; Igmp-Snooping Report-Aggregation - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
Example
# Set the aging time of multicast member ports to 300 seconds.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] igmp-snooping host-aging-time 300

1.1.10 igmp-snooping max-response-time

Syntax
igmp-snooping max-response-time seconds
undo igmp-snooping max-response-time
View
System view
Parameter
seconds: Query response timeout time, in the range of 1 to 25 in seconds.
Description
Use the igmp-snooping max-response-time command to configure the query
response timeout time.
Use the undo igmp-snooping max-response-time command to restore the default
timeout time.
By default, the query response timeout time is 10 seconds.
The maximum response time you configured determines how long the switch can wait
for a response to an IGMP Snooping query message.
Related command: igmp-snooping, igmp-snooping router-aging-time.
Example
# Set the query response timeout time to 15 seconds.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] igmp-snooping max-response-time 15

1.1.11 igmp-snooping report-aggregation

Syntax
igmp-snooping report-aggregation
Chapter 1 IGMP Snooping Configuration Commands
1-10