3Com 7750 Series Command Reference Manual page 636

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Parameter
string: VLAN Name for VLAN assignment, a character string of up to 32 characters.
Description
Use the name command to set a VLAN name, which will be used for VLAN assignment.
Use the undo name command to cancel the VLAN name.
By default, an VLAN uses its VLAN ID (like VLAN 0001) as its name.
This command is used for the dynamic VLAN assignment function. For details about
this function, refer to the vlan-assignment-mode command.
Related command: dot1x guest-vlan and vlan-assignment-mode.
Example
# Set the name of VLAN 100 to test.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] vlan 100
[3Com-vlan100] name test
1.1.14 password
Syntax
password { simple | cipher } password
undo password
View
Local user view
Parameter
simple: Specifies to display the password in plain text.
cipher: Specifies to display the password in cipher text.
password: Password you want to set, a character string.
For simple mode, the password must be in plain text.
For cipher mode, the password can be either in cipher text or in plain text,
depending on your input.
A password in plain text can be a string with of up to 16 consecutive characters, for
example, 3Com918. A password in cipher text can be 24 characters in length, for
example, _(TT8F]Y\5SQ=^Q`MAF4<1!!.
Chapter 1 AAA & RADIUS & HWTACACS
1-15
Configuration Commands