Display Memory; Route Capacity Configuration Commands - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Chapter 7 Route Capacity Configuration
Note:
The word "router" covered in the following text represent routers in common sense
and Ethernet switches running a routing protocol. To improve readability, this will not
be mentioned again in this manual.

7.1 Route Capacity Configuration Commands

7.1.1 display memory

Syntax
display memory [ slot slot_number ]
View
Any view
Parameter
slot_number: Number of the slot whose route capacity information is displayed.
Description
Use the display memory command to display the memory setting.
Example
# Display the current memory setting of the switch.
<3Com> display memory
System Total Memory(bytes): 203563008
Total Used Memory(bytes): 77852012
Used Rate: 38%
The following table shows describes the fields of the command:
Chapter 7 Route Capacity Configuration Commands
Commands
7-1