User-Name-Format - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds: Response timeout time of RADIUS servers, ranging from 1 second to 10
seconds. By default, the response timeout time of the RADIUS server is three seconds.
Description
Use the timer response-timeout command to set the response timeout time of
RADIUS servers.
Use the undo timer response-timeout command to restore the default response
timeout timer of RADIUS servers.
Note that:
If the switch gets no response from the RADIUS server after sending out a
RADIUS request (authentication/authorization request or accounting request) and
waiting for a time, it should retransmit the packet to ensure that the user can obtain
the RADIUS service. This wait time is called response timeout time of RADIUS
servers; and the timer in the switch system that is used to control this time is called
the response timeout timer of RADIUS servers. You can use the timer
response-timeout command to set the timeout time of this timer.
Appropriately setting the timeout time of this timer according to the network
situation can improve the performance of the system.
This command has the same effect with the timer command.
Related command: radius scheme and retry.
Example
# Set the response timeout time in the RADIUS scheme radius1 to five seconds.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] timer response-timeout 5

1.2.29 user-name-format

Syntax
user-name-format { with-domain | without-domain }
View
RADIUS scheme view
Chapter 1 AAA & RADIUS & HWTACACS
1-52
Configuration Commands