Flow Interval - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands
undo flow-control disable
View
System view
Parameter
None
Description
Use the flow-control enable command to enable flow control globally.
Use the flow-control disable command to disable flow control globally.
By default, flow control is disabled globally.
Example
# Enable flow control globally.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] flow-control enable

1.1.12 flow interval

Syntax
flow-interval interval
undo flow-interval
View
Ethernet port view
Parameter
Interval: Interval (in seconds) to perform statistics on port information. This argument
ranges from 5 to 300 (in step of 5) and is 300 by default.
Description
Use the flow-interval command to set the interval to perform statistics on port
information.
Use the undo flow-interval command to restore the default interval.
By default, this interval is 300 seconds.
When you use the display interface interface-type interface-number command to
display the information of a port, the system performs statistical analysis on the traffic
flow passing through the port during the specified interval and displays the average
Chapter 1 Port Basic Configuration Commands
1-13