Secondary Authorization - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
You can remove an authentication server only when it is not being used by any
active TCP connections.
Related command: display hwtacacs.
Example
# Configure a secondary server.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] secondary authentication 10.163.155.13 49

1.3.16 secondary authorization

Syntax
secondary authorization ip-address [ port ]
undo secondary authorization
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
port: Port number of the server, in the range of 1 to 65535. By default, it is 49.
Description
Use the secondary authorization command to configure a secondary TACACS
authorization server.
Use the .undo secondary authorization command to delete the configured
secondary authorization server.
By default, the IP address of TACACS authorization server is 0.0.0.0.
Note that:
You are not allowed to assign the same IP address to both primary and secondary
authorization servers.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove an authorization server only when it is not being used by any
active TCP connections.
Related command: display hwtacacs.
Chapter 1 AAA & RADIUS & HWTACACS
1-67
Configuration Commands