Chapter 1 802.1X Configuration Commands; Display Dot1X; Configuration Commands - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – 802.1x

Chapter 1 802.1x Configuration Commands

1.1 802.1x Configuration Commands

1.1.1 display dot1x

Syntax
display dot1x [ sessions | statistics ] [ interface interface-list ]
View
Any view
Parameter
sessions: Displays the formation about 802.1x sessions.
statistics: Displays the statistics information about 802.1x.
interface: Display the 802.1x-related information about a specified port.
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-name [ to interface- name] & < 1-10 >.
The interface-name argument is the port index of an Ethernet port and can be specified
in this form: interface-name = { interface-type interface-num }, where interface-type
specifies the type of an Ethernet port and interface-num identifies the number of the
port. "&<1-10>" means that up to 10 port indexes/port index lists can be provided.
Description
Use the display dot1x command to display 802.1x-related information, such as
configuration information, operation information (session information), and statistics.
By default, this command displays all 802.1x-related information of each port.
When the interface-list argument is not provided, this command displays
802.1x-related information on all ports. The output information can be used to verify
802.1 x-related configurations and to troubleshoot.
Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user,
dot1x port-control, dot1x port-method, and dot1x timer.
Example
# Display 802.1x-related configuration information.
<3Com> display dot1x
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Chapter 1 802.1x Configuration Commands
1-1