3Com 7750 Series Command Reference Manual page 357

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Area 0.0.0.0:
Authtype: none
SPF scheduled: <Router Net Intra>
Interface: 110.1.1.1 (Vlan-interface110)
Cost: 11 State: DR
Priority: 11
Designated Router: 110.1.1.1
Backup Designated Router: 110.1.1.2
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Table 3-3 Description on the fields of the display ospf brief command
RouterID
Border Router
spf-schedule-interval
Authtype
Routing preference
Default
parameters
SPF
count
Area Count
Nssa Area Count
SPF scheduled
Interface
Cost
State
Type
Priority
Designated Router
Backup
Router
Flags: <>
Type: Broadcast
Field
Router ID of the router
Border routers for connection to the area, including ASBRs
and ABRs
Interval of SPF schedule
Authentication type of OSPF
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10, while that of the external route of OSPF is
150 by default
ASE Default ASE parameters of OSPF, including metric, type
and tag
computation
SPF computation count since OSPF is enabled
Areas for connection to this router
Number of NSSA areas
SPF scheduled (flag)
Name of interface belonging to this area
Cost of routes
State information
Network type of OSPF interface/the first type refers to the
type of the imported external route
Priority
IP address of designated router (DR)
Designated
IP address of backup designated router (BDR)
Chapter 3 OSPF Configuration Commands
Description
3-14