Rmdir - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – FTP and TFTP
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Display the syntax of the user command.
[ftp] remotehelp user
214 Syntax: USER <sp> <username>

1.2.22 rmdir

Syntax
rmdir pathname
View
FTP client view
Parameter
pathname: Name of a directory on an FTP server.
Description
Use the rmdir command to remove a directory on an FTP server.
Note that you can only use this command to remove directories that are empty.
Example
# Enter FTP client view.
<3Com> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Remove the directory flash:/temp1 on the FTP server. (Assume that the directory is
empty.)
Chapter 1 FTP and TFTP Configuration Commands
1-22