Display Dhcp Server Tree - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
Boot Reply:
Dhcp Offer:
Dhcp Ack:
Dhcp Nak:
Bad Messages

1.1.20 display dhcp server tree

Syntax
display dhcp server tree { pool [ pool-name ] | interface [ interface-type
interface-number ] | all }
View
Any view
Parameter
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string
of 1 to 35 characters, is the name of an address pool. If you do not provide this
argument, this command applies to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not
specify a VLAN interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.
Description
Use the display dhcp server tree command to display information about address
pool tree.
Example
# Display the information about address pool tree.
<3Com> display dhcp server tree all
Global pool:
Pool name: 5
network 10.10.1.0 mask 255.255.255.0
Child node:6
Sibling node:7
option 10 ip-address 255.0.0.0
expired 1 0 0
Field
4
1
Statistics about the DHCP packets sent to DHCP
clients
3
0
Number of the error DHCP packets
1-20
Chapter 1 DHCP Server Configuration Commands
Description