Display Ip Ip-Prefix - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, if-match tag, route-policy, apply ip next-hop, apply
local-preference, apply cost, and apply origin.
Example
# Define an apply statement. When it is used for setting route information attribute, it
sets the tag area of route information as 100.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] route-policy policy_10 permit node 12
%New sequence of this list
[3Com-route-policy] apply tag 100

6.1.10 display ip ip-prefix

Syntax
display ip ip-prefix [ ip-prefix-name ]
View
Any view
Parameter
ip-prefix-name: Name of the address prefix list to be displayed, containing 1 to 19
characters.
Description
Use the display ip ip-prefix command to display an address prefix list.
Related command: ip ip-prefix.
Example
# Display the information about the address prefix list named p1.
<3Com> display ip ip-prefix p1
name
p1
Table 6-1 Description on the fields of the display ip ip-prefix command
name
index
conditions
Chapter 6 IP Routing Policy Configuration Commands
index conditions
10 permit
Field
6-8
ip-prefix / mask
10.1.0.0/16
Description
Name of ip-prefix
Internal sequence number of ip-prefix
Mode: permit or deny
GE LE
17 18