Preference; Reset - 3Com 7750 Series Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for 7750 Series:

Table of Contents

3Com Switch 7750 Series

Command Reference Guide – Routing Protocol

2.1.11 preference

preference value

undo preference

value: Preference level, ranging from 1 to 255. By default, the value is 100.

Use the preference command to configure the route preference of RIP.

Use the undo preference command to restore the default preference.

Every routing protocol has its own preference. Its default value is determined by the

specific routing policy. The preferences of routing protocols will finally determine

which routing algorithm's routes will be selected as the optimal routes in the IP routing

table. You can use this command to modify the RIP preference manually.

# Specify the RIP preference as 20.

<3Com> system-view

System View: return to User View with Ctrl+Z.

[3Com-rip] preference 20

Use the reset command to reset the system configuration parameters of RIP.

Chapter 2 RIP Configuration Commands

Table of Contents