3Com 7750 Series Command Reference Manual page 1010

3Com Switch 7750 Series
Command Reference Guide – FTP and TFTP
# Change the work directory to flash:/temp.
[ftp] cd flash:/temp
250 CWD command successful.
# Display the current work directory.
[ftp] pwd
257 "flash:/temp" is current directory.
1.2.5 cdup
Syntax
cdup
View
FTP client view
Parameter
None
Description
Use the cdup command to go to the parent directory of the current directory.
Example
# Enter FTP client view.
<3Com> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Change the work directory to flash:/temp.
[ftp] cd flash:/temp
# Change the work directory to the parent directory.
[ftp] cdup
200 CDUP command successful.
# Display the current directory.
[ftp] pwd
Chapter 1 FTP and TFTP Configuration Commands
1-7