Check Region-Configuration - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – MSTP

1.1.2 check region-configuration

Syntax
check region-configuration
View
MST region view
Parameter
None
Description
Use the check region-configuration command to display the current MST region
configuration, including region name, revision level, and VLAN mapping table.
MSTP-enabled switches are in the same region only when they have the same MST
region-related configuration. A switch cannot be in a respected region if any one of the
above three MST region-related settings does not be consistent with that of another
switch in the region.
You can use this command to find the MST region the switch currently belongs to or
check to see whether or not the MST region-related configuration is correct.
Related command: instance, region-name, revision-level, vlan-mapping modulo,
and active region-configuration.
Example
# Display the MST region configuration of the current switch.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] stp region-configuration
[3Com-mst-region] check region-configuration
Admin Configuration
Format selector :0
Region name
Revision level
Instance
0
16
:00e0fc003900
:0
Vlans Mapped
1 to 9, 11 to 4094
10
1-2
Chapter 1 MSTP Configuration Commands