3Com 7750 Series Command Reference Manual page 1015

3Com Switch 7750 Series
Command Reference Guide – FTP and TFTP
Description
Use the disconnect command to terminate a FTP connection without quitting FTP
client view.
This command has the same effect as that of the close command.
Example
# Enter FTP client view.
<3Com> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Terminate the FTP connection without quitting FTP client view.
[ftp] disconnect
221 Server closing.
[ftp]
1.2.11 ftp
Syntax
ftp [ cluster | remote-server [ port-number ] ]
View
User view
Parameter
ip-address: Host name or the IP address of an FTP server. Note that the host name can
be a string comprising 1 to 20 characters.
port-number: Port number of the FTP server, ranging from 0 to 65535. The default is 21.
Description
Use the ftp command to establish a control connection with an FTP server and enter
FTP client view.
Chapter 1 FTP and TFTP Configuration Commands
1-12