Display Snmp-Agent Usm-User - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON
# Display the system location string.
<3Com> display snmp-agent sys-info location
The physical location of this node:
The above information indicates that the device location is Beijing China.
# Display the current SNMP version.
<3Com> display snmp-agent sys-info version
SNMP version running in the system:
The above information indicates that the current SNMP version is SNMPv3.

1.1.7 display snmp-agent usm-user

Syntax
display snmp-agent usm-user [ engineid engineid | username user-name | group
group-name ]*
View
Any view
Parameter
engineid: Displays the SNMPv3 user information of the specified engine ID, which
ranges from 10 to 64 hexadecimal numerals.
username: Displays information about the specified SNMPv3 user, which ranges from
1 to 32 bytes.
groupname: Displays information about users in the specified group name, which
ranges from 1 to 32 bytes.
Description
Use the display snmp-agent usm-user command to view SNMP user information.
If you do not specify a parameter, all the information will be displayed.
Example
# Display all user information.
<3Com> display snmp-agent usm-user engineid 1234567890
User name: userv3aaaa
Group name: managev3group
Engine ID: 1234567890
Storage-type: nonVolatile
UserStatus: active
Beijing China
SNMPv3
Chapter 1 SNMP Configuration Commands
1-7