Dhcp Server Static-Bind - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
View
System view
Parameter
packets number: Specifies the number of the packets to be sent in a ping test. The
number argument ranges from 0 to 10 and defaults to 2. Value 0 means no packet will
be sent.
timeout milliseconds: Specifies the timeout time (in milliseconds) of each packet. The
milliseconds argument ranges from 0 to 10,000 and defaults to 500.
Description
Use the dhcp server ping command to set the maximum number of the ICMP packets
a DHCP server sends in a ping test and the maximum response timeout time of each
ICMP packet.
Use the undo dhcp server ping command to restore the default settings.
Example
# Set the maximum number of the packets the DHCP server sends in a ping test to 10,
and the timeout time of each packet to 500 milliseconds.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp server ping packets 10

1.1.14 dhcp server static-bind

Syntax
dhcp server static-bind ip-address ip-address mac-address mac-address
undo dhcp server static-bind { ip-address ip-address | mac-address mac-address }
View
VLAN interface view
Parameter
ip-address: IP address to be statically bound. Note that the specified IP address must
belong to the same network segment as that of the VLAN interface.
mac-address: MAC address to which the IP address is statically bound.
Description
Use the dhcp server static-bind command to statically bind an IP address of the
current address pool to a MAC address.
Chapter 1 DHCP Server Configuration Commands
1-13