Port-Isolate Group - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Port Isolation
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface gigabitethernet1/0/1
[3Com-GigabitEthernet1/0/1] port isolate group 1

1.1.5 port-isolate group

Syntax
port-isolate group group-id
undo port-isolate group group-id
View
System view
Parameter
group-id: ID of an isolation group, in the range of 1 to 64.
Description
Use the port-isolate group command to create an isolation group.
Use the undo port-isolate command to remove the specified isolation group.
By default, an isolation contains no Ethernet ports.
Example
# Create isolation group 1.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] port-isolate group 1
[3Com-port-isolate-group1]
Chapter 1 Port Isolation Configuration Commands
1-4