Update Webgui Now - Allied Telesis AR2050V Command Reference Manual

GUI C
OMMANDS

UPDATE WEBGUI NOW

update webgui now
Overview Use this command to check whether you have the latest version of the device's GUI
and update it if a newer version is available.
update webgui now
Syntax
Mode Privileged Exec
Usage This command applies since software version 5.4.6-1.1. Prior to 5.4.6-1.1, users
used the copy command to copy GUI files onto the AR-series firewall instead. If you
did that, you need to delete all GUI files from Flash memory before you run the
"update webgui now" command. To delete all GUI files, use the command:
awplus#del *gui_*.tar.gz
Examples To check for GUI updates, use the following command:
awplus#update webgui now
Related show resource
Commands
C613-50186-01 Rev B Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
207