Http Secure-Port - Allied Telesis AR2050V Command Reference Manual

GUI C
OMMANDS
-
HTTP SECURE PORT

http secure-port

Overview Use this command to change the HTTPS port used to access the Firewall GUI.
Use the no variant of this command to return to using the default port, which is
443.
Syntax http secure-port <1-65535>
no http secure-port
Default This command is disabled by default and port 443 is used for accessing the GUI.
Mode Global Configuration
Usage Note that any device on which a non-default secure port is set will have limited
capabilities when accessed via Vista Manager. Additionally, all external API
requests will need to be directed to the configured port, instead of the default port
443.
Example To set the port to 8443, use the commands:
awplus#
awplus(config)#
To return to using the default port of 443, use the commands:
awplus#
awplus(config)#
Related service http
Commands
show http
Command Version 5.4.7-1.1: command added
changes
C613-50186-01 Rev B
Parameter Description
<1-65535>
The HTTPS port number
configure terminal
http secure-port 8443
configure terminal
no http secure-port
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
203