Atmf Topology-Gui Enable - Allied Telesis AR2050V Command Reference Manual

GUI C
OMMANDS
-
ATMF TOPOLOGY GUI ENABLE

atmf topology-gui enable

Overview Use this command to enable the operation of Vista Manager EX on the Master
device.
Vista Manager EX delivers state-of-the-art monitoring and management for your
Autonomous Management Framework™ (AMF) network, by automatically creating
a complete topology map of switches, firewalls and wireless access points (APs).
An expanded view includes third-party devices such as security cameras.
Use the no variant of this command to disable operation of Vista Manager EX.
atmf topology-gui enable
Syntax
no atmf topology-gui enable
Default Disabled by default on AMF Master and member nodes. Enabled by default on
Controllers.
Mode Global Configuration mode
Usage To use Vista Manager EX, you must also enable the HTTP service on all AMF nodes,
including all AMF masters and controllers. The HTTP service is enabled by default
on AlliedWare Plus switches and disabled by default on AR-Series firewalls. To
enable it, use the commands:
Node1#
Node1(config)#
On one master in each AMF area in your network, you also need to configure the
master to send event notifications to Vista Manager EX. To do this, use the
commands:
Node1#
Node1(config)#
Example To enable Vista Manager EX on Node1, use the following commands:
Node1#
Node1(config)#
To disable Vista Manager EX on Node1, use the following commands:
Node1#
Node1(config)#
Related atmf enable
Commands
log event-host
service http
C613-50186-01 Rev B
configure terminal
service http
configure terminal
log event-host <ip-address> atmf-topology-event
configure terminal
atmf topology-gui enable
configure terminal
no atmf topology-gui enable
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
202