Allied Telesis AR2050V Command Reference Manual page 150

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW RUNNING CONFIG INTERFACE
Mode Privileged Exec and Global Configuration
Default Displays information for all protocols on all interfaces
Examples To display the current running configuration of your device for ports 1 to 4, use the
command:
awplus#
To display the current running configuration of a device for VLAN 1, use the
command:
awplus#
To display the current running configuration of a device for VLANs 1 and 3-5, use
the command:
awplus#
To display the current OSPF configuration of your device for ports 1 to 6, use the
command:
awplus#
Output Figure 2-11: Example output from a show running-config interface ppp0
Related copy running-config
Commands
show running-config
C613-50186-01 Rev B
C
OMMANDS
Parameter
rstp
stp
show running-config interface port1.0.1-port1.0.4
show running-config interface vlan1
show running-config interface vlan1,vlan3-vlan5
show running-config interface port1.0.1-port1.0.6 ospf
command
awplus#show running-config interface ppp0
!
interface ppp0
ipv6 address 2001:db9::a3/64
ipv6 enable
snmp trap link-status
!
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Displays running configuration for RSTP (Rapid Spanning
Tree Protocol) for the specified interfaces.
Displays running configuration for STP (Spanning Tree
Protocol) for the specified interfaces.
150