Security-Password History - Allied Telesis AR2050V Command Reference Manual

U A C
SER CCESS OMMANDS
-
SECURITY PASSWORD HISTORY

security-password history

Overview This command specifies the number of previous passwords that are unable to be
reused. A new password is invalid if it matches a password retained in the
password history.
The no variant of the command disables this feature.
Syntax security-password history <0-15>
no security-password history
The default history value is 0, which will disable the history functionality.
Default
Mode Global Configuration
Examples To restrict reuse of the three most recent passwords, use the command:
awplus#
awplus(config)#
To allow the reuse of recent passwords, use the command:
awplus#
awplus(config)#
Related security-password forced-change
Commands
security-password lifetime
security-password min-lifetime-enforce
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
security-password warning
show running-config
show security-password configuration
show security-password user
C613-50186-01 Rev B
Parameter Description
<0-15>
The allowable range of previous passwords to match against. A
value of 0 will disable the history functionality and is equivalent to
the no security-password history command. If the history
functionality is disabled, all users' password history is reset and all
password history is lost.
configure terminal
security-password history 3
configure terminal
no security-password history
security-password
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
179