Show Startup-Config - Allied Telesis AR2050V Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW STARTUP CONFIG

show startup-config

Overview This command displays the contents of the start-up configuration file, which is the
file that the device runs on start-up.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show startup-config
Mode Privileged Exec
Example To display the contents of the current start-up configuration file, use the
command:
awplus#
Output Figure 2-12: Example output from the show startup-config command
awplus#show startup-config
!
service password-encryption
!
no banner motd
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
no service ssh
!
service telnet
!
no clock timezone
.
.
.
line con 0
line vty 0 4
!
end
Related boot config-file backup
Commands
copy running-config
copy startup-config
erase startup-config
show boot
C613-50186-01 Rev B
C
OMMANDS
show startup-config
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
151